Clik here to view.
S/Q Question on microhd
ok look at these 2 pics, why would this happen? shouldnt i have 90% S on all TPs but i get 45 and no Q on some... what am i missing? I should be on 83 with 73% Q on my Birdog. Either i been out of the...
View ArticlePost November 2012 firmware reboot cycle
I took a few minutes today to play with the miniBUD, and unfortunately, discovered a still present reboot cycle issue. While it's fresh in my mind, I decided to post the steps here: SCENARIO 1 Blind...
View ArticleSignal Quality Update Rate
Would it be possible to slow down the signal quality update rate by increasing/implementing averaging rate to more like 2-4 seconds? Currently, the update rate is something like 1/2 second on both the...
View ArticleTrying to add transponder
I was trying to scan 107.3 w for CBC and CTV . I was able to get CBC feed from 11933MHz H (left). When I got looking at the TP list I saw that the Transponders I was looking for are not on the list, so...
View Articleooopps, my microhd is rebooting.
steps as near as i can remember. i should have been using the test load of 11/29 but saved the whole load to test a c lnb on the 1.2. added all the c band satellites yesterday and 99w tuned in fine....
View ArticlePansat 9500HDX vs MicroHD C-band
Purchased the MicroHD to replace a Pansat9500HDX thinking that the MicroHD had a more sensitive tuner for mpeg4 signals with higher SR's. What I discovered when I changed receivers is that can not...
View ArticleSignal Level Sensitivity
Purchased the MicroHD to replace a Pansat9500HDX thinking that the MicroHD had a more sensitive tuner for mpeg4 signals with higher SR's. What I discovered when I changed receivers is that can not...
View ArticleClik here to view.
New microHD Firmware Release: GSPMHD_0.15_12052012 Available for USB and...
Release: December 5th, 2012 Minor Operational Firmware Update is now available. GEOSATpro firmware GSPMHD_0.15_12052012 for USB Update or OTA-SSU updating via satellite Galaxy 19, transponder frequency...
View ArticleFeature Request: Manual Aspect Ratio
Would it be possible to force a 4:3 pillar box setting (4:3PB - black bands on left and right) for TV System > Aspect Ratio? I have seen channels that can not be displayed properly using any of...
View ArticleUpdate via Satellite
Doesn't appear to work..all the other times it worked just fine..all it says is "Notice:collecting update file information" and with a "STOP" in the middle of the screen???
View ArticlePlease Print A Steps By Step Instructions On What Is Needed To Install...
I know that there are some instructions and warnings on how to safely install a new microHD firmware releases, there is also some confussion of what is the best way to go about doing this. I am talking...
View ArticleA Couple of Minor Issues
ISSUE 1 "TP already exists! - Jump exist tp" leaves commingled display on screen. Go to "TP List" Select "Add" and enter an existing tp in the "Add TP" screen that appears Select "Save" When "TP...
View ArticleClik here to view.
GEOSATpro MicroHD: How to Update Firmware (.abs) by USB
12/05/2012 GEOSATpro microHD How to: Firmware (.abs) file Update via USB 1. Download and unzip the microHD firmware update. 2. Read the attached release notes. 3. Save the new firmware (.abs) file to...
View ArticleClik here to view.
GEOSATpro MicroHD: How to Update User Data Base (.udf) file by USB
12/05/2012 GEOSATpro microHD How to: User Data Base (.udf) Update via USB 1. Save the microHD User Data Base (.udf) file to an USB drive. 2. Insert the USB drive into the microHD rear panel USB port....
View ArticleQuestion about "high-end" features
I got my MicroHD about a month or so ago, and it's been rock solid so far. Except for a couple of nits regarding the user interface, I've been very happy with it. I was wondering if Brian or any of the...
View ArticleClik here to view.
GEOSATpro microHD Beta Firmware GSPMHD_0.16_12062012
December 6th, 2012 Beta Firmware is available for Improved Timers and Recording. GEOSATpro firmware GSPMHD_0.16_12062012 for USB Update Warning: The GSP_MHD_016 update is a main system file and will...
View ArticleStreambox Transport on 103w for MicroHD
Is this another way to update the MicroHD via satellite? 103w - 12144 V 20000 ACT-L3 NTSC
View Articlemicrohd component out
Brian: Is there no component out on the micro because of the size (obviously but no break out cable like the composite) or is it worthless because everything is protected with HDCP now?
View ArticleOpenbox S16 vs microHD
i bought both Openbox S16 and microHD. it turns out that their function and software are almost identical. The only difference i found is that microHD offers close caption option while S16 not....
View ArticleOk, this has finally pissed me off!
My MicroHD receiver is set so it does NOT go into Standby, and it never gets turned off so the clock stays the same. I keep it mostly on 101w and parked on MEtv 1 the main feed, as that's the channel I...
View Article