New microHD Firmware Release: GSPMHD_0.13_11142012 Available for USB and Satellite Update (OTA-SSU) 11.14.2012

Release: November 29th, 2012

Major Operational Firmware Update is now available.

GEOSATpro firmware GSPMHD_0.13_11142012 for USB Update
or
OTA-SSU updating via satellite Galaxy 19, transponder frequency 12115 (Do not change any other settings in the Manual Update Menu screen).

Warning: The GSP_MHD_013 update is a main system file and will overwrite your settings and channel scans. We strongly recommend users to perform a complete factory reset after the firmware update and use the attached new Satellite/ Transponder list. If you use a switch or motor, you will need reconfigure and re-enter your location Longitude and Latitude settings.


Important Notice: Before updating the firmware, Please back-up your current firmware to an USB - Save to USB (ALLCODE) .abs

• After the .abs firmware file update is completed, power cycle the receiver by removing and reinserting the power plug. Perform a Factory Reset before reconfiguring the satellite settings and scanning for channels

MicroHD Firmware Release Notes:

Date: 11/29/2012
GSPMHD_0.13_11142012

• Corrected: Cycling reboot on corrupted user .udf file
• Corrected: Reboot on satellite list deactivation
• Corrected: H.264 service logging on muxes with multiple signal source types (scans the HD h.264 channels on 99w mux)
• Changed: Modified service scan process for logging services at lower threshold signal level
• Changed: Increased IR sensitivity
• Added: Data Service Logging to increase ability to log non-compliant DVB services
• Added: Recording of data services for playback or analysis with external equipment

Attached Files

• GSPMHD_0.13_11142012.zip (1.82 MB)